Rear Panel - Monacor AHR-40 Bedienungsanleitung

3.2 Rear Panel

Fig. 3-6 AHR-40
AUDIO
INPUT
22
Fig. 3-7 AHR-80
Fig. 3-8 AHR-160
Item Connection
20 Video input
Audio input
21
(AHR-160 only)
22 Audio input
23 Audio output
24 VGA port
25 HDMI
26 Ethernet port
27 RS-485/Sensor/Alarm
28 USB port
29 Power port
30 Power switch
31 IR-Ext
AHR-40
4 3 2 1 G RS485
SENSOR ALARM
8 7 6 5 4 3 2 1 G RS485
SENSOR ALARM
G 1 2 3 4 G 5 6 7 8 G
RS485 ALARM
Fig. 3-9 Connection RS485/Sensor/Alarm
34
3 1
3
4 2 4
AUDIO VIDEO
IR-EXT OUTPUT INPUT
31 23 20
4 3 2
8 6
AUDIO VIDEO
OUTPUT INPUT
23 20
20
Function
Video input (BNC)
Audio input for channels 9 – 16 (D-Sub jack)
Connection via supplied adapter cable with RCA sockets
Audio input (RCA)
AVR-40: for channels 1– 4
AVR-80 and AVR-160: for channels 1– 8
Audio output (RCA)
Connect to VGA monitor, such as PC monitor
HDMI output
Connect LAN, Ethernet (RJ45 interface)
RS485/Sensor/Alarm interface (see pin outs below)
Connect USB mouse
Connect power
Turn power on and off
Connect IR extended cable
AHR-80
AHR-160
9 10 11 12 13 14 15 16
SENSOR
1
2
AUDIO
INPUT HDMI TM VGA
22 25 24 26
1
4 2
HDMI TM VGA
25 24 31 26
21
Sensor /Alarm port / RS-485 (27) connections:
Alarm input: Alarm input: Connect the port [–] of a sensor
to the pin G (ground) and connect the port [+] of the sensor
to the respective channel input (1 – 16) of the recorder. Then
proceed in the same way to connect the other sensors.
Alarm output: Connect to the two ports marked with "out".
PTZ Port: Connect your camera to RS-485 [+] and [−]
accordingly.
LAN
12 V
4 3 2 1 G RS485
SENSOR ALARM
28 27 29 30
LAN
12 V
8 7 6 5 4 3 2 1 G RS485
SENSOR ALARM
28 27 29 30
22 23 24 25 26 27 28 29 30 31