Herunterladen Inhalt Inhalt Diese Seite drucken

Snapshot Function; Configuration; Display Configuration; Record - Monacor AHR-40 Bedienungsanleitung

Vorschau ausblenden Andere Handbücher für AHR-40:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

1
2
3
4
Fig. 7-13
Record file clip
After opening playback, click
file; and click again to stop the clip function. Record clip file
will be saved as *.264 format.

Snapshot function

Move the mouse curse to the channel you want to capture,
and click
icon (8) to capture the live images remotely. After
capturing the images successfully, you are allowed to save it
to a specified path shown as fig. 7-14. The captured file will
be saved as *.bmp format.
Fig. 7-14
Record file download
Click
icon (9) to enter into the below interface (fig. 7-15).
Tick-select the record file you want to download and click
[Start download]. System will download the record file in turn
and save to local PC.

7.3.3 Configuration

7.3.3.1 Display Configuration

Unfold [Display] option to find its sub-options: Live and Privacy
zone.
Live: Allow you modify channel name, Position, Show time
and Record time. If show time is set to <disable>, current
5
6
7
8
9
10 11
icon (7) to clip the selected
Fig. 7-15
Fig. 7-16
12
system time will not appear on the screen on Live mode; and
if record time is set to <off>, system time can't be found in
the record file.
Privacy zone: Each channel could set up to four privacy zones
shown as fig. 7-17. Details parameters please refer to chapter
6.2.1.3 on page 38. If you want to delete one privacy zone,
please firstly select one zone, and then click <Delete> button
and click <Save> on the right corner.

7.3.3.2 Record

Click <Record> option to unfold its sub-options:
Record parameter, Schedule and Main stream.
Record Parameters: Under [Record parameters] option, allow
you set channel, record enable, pack time and Pre-record
status. Details parameters please refer to chapter 6.2.2.1 on
page 38.
Schedule: Detailed parameters please refer to DVR local set-
ting (chapter 6.2.2.2 on page 38). Green stand for Normal
record; Yellow stands for Motion detection; Red stands for
I/O triggered record.
13 14 15 16 17
Fig. 7-17
Fig. 7-18
Fig. 7-19
49

Werbung

Kapitel

Inhaltsverzeichnis
loading

Diese Anleitung auch für:

18.416018.417018.4180Ahr-80Ahr-160

Inhaltsverzeichnis