Advanced; Firmware-Update; Local Setting; Logout - Monacor AHR-40 Bedienungsanleitung

7.3.3.7 Advanced

Click <Advance> to unfold its sub-options: Firmware update,
Load default, Events and system maintain etc.
1. Firmware update
Allow you upgrade DVR system remotely shown asfig. 7-35.
Please follow below steps to upgrade the system:
a) Select the upgrade file's path shown as fig. 7-36. Please
note that the format of upgrade file is *.sw.
b) Click <Start update>, now processing bar will display current
upgrade status shown as fig. 7-37.
2. Load Default
Allow you recover defaulted parameters of DVR remotely
shown as fig. 7-38. Details setting should be consistent with
DVR local setting.
52
3. Events
Allow you configure abnormal type, buzzer output time, and
alarm email and show message shown as fig. 7-39. Details
setting should be consistent with DVR local setting.
Fig. 7-35
4. Maintain
Allow you set auto system maintain for DVR remotely shown
as fig. 7-40. Detail setting should be consistent with DVR

local setting.

7.3.4 Local setting
Under <Local setting> option, user could set record path of
Fig. 7-36
record file (Live record and Playback clip file), download path
of remote file, Snapshot path, File type (H.264 and AVI) and
Internal shown as fig. 7-41.

7.3.5 Logout

Fig. 7-37
Click the
Fig. 7-38
icon to return back the log-in interface.
Fig. 7-39
Fig. 7-40
Fig. 7-41