Landing On Water; Flight Operation - Carson Easy Tyrann 235 Waterbeast Betriebsanleitung

LanDIng on water

Carefully reduce the speed of the rotors.
Now bring the helicopter in to land; take care that the water
surface is calm !!!

FLIgHt operatIon

trimming the quadcopter
Already shortly before the quadcopter takes off, you can recognize
whether it wants to turn or glide in a particular direction. Correct
the deviations from the vertical ascent with the trim knob of the
turn function.
tip of the fuselage turns to the right:
• Reduce speed and push the trim slider of the turn function on
the right remote control lever stepwise to the left.
• Push the throttle-lever forward again and check whether the
correction was sufficient, if necessary shift the trim further to
the left.
• Repeat the process until the quadcopter no longer shows a
tendency to turn to the right.
tip of the fuselage turns to the left:
• Proceed as described above, but push the trim slider of the turn
function stepwise to the right.
25 // GB