LI-Ion battery cHargIng
the helicopter is fitted with a Li-ion battery.
3.7 V Li-Ion battery.
1. The supplied Li-Ion battery is stored in the body of the
helicopter.
2. Connect the charger to the socket.
3. Connect the battery pack to the charger.
(Status LED glows red)
4. Status LED goes out - battery pack is fully charged
get tHe HeLIcopter reaDy For takeoFF
Now we're good to go! But before liftoff, make sure that you have read this manual through completely.
ON/OFF
switch
1
Connect the battery to the helicopter. Switch the helicopter on and
place it on a level surface.
3
Now move the throttle lever completely up and then back down.
Now the helicopter is ready to launch.
2
Now push the throttle lever fully down and then switch on the
transmitter.
ON/
OFF
23 // GB