Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Installation
12. Before installation
1 Clean the area thoroughly before installation, no dust or debris can be
!
aspirated.
2 The exhaust hose must not be routed together with gas pipes, hot-air
pipes, etc. through a chute.
3 The exhaust tube should be as straight as possible carried away from the
cover and guided at a maximum deflection of 120 ° towards the outside and
secured to the outer wall.
4 In order to avoid accumulations of fat in a corner, make sure when instal-
ling that the hood is suspended horizontally.
12.1 Operation modes
Exhaust air mode
Without carbon filter
!
Please see installation specifica-
tion in chapter 7.1.
38
Circulating air filter mode
Install the carbon
filter (s) before
installing the
grease filters.
Werbung
Kapitel
Inhaltsverzeichnis
Fehlerbehebung
