Before Installation; Operation Modes - KKT KOLBE Cube Benutzerhandbuch

Installation

. Before installation

!

. Operation modes

Exhaust air mode
Without carbon ilter
!
Please see installation speciica-
tion in chapter . .
Gewerbliches inhaltliches Kopieren verboten! Gewerbliches inhaltliches Kopieren verboten!
Clean the area thoroughly before installation, no dust or debris can be
aspirated.
The exhaust hose must not be routed together with gas pipes, hot-air
pipes, etc. through a chute.
The exhaust tube should be as straight as possible carried away from the
cover and guided at a maximum delection of
and secured to the outer wall.
In order to avoid accumulations of fat in a corner, make sure when instal-
ling that the hood is suspended horizontally.
° towards the outside
Circulating air ilter mode
Same procedure
as described un-
der the following
chapter B. Howe-
ver, omit step .
In addition it the
carbon ilter s
A before moun-
ting the grease
ilter Fig. A