Eco Standby (Eco) - Canton Digital Movie 55 Bedienungsanleitung

Eco Standby (ECO)

When this function is activated (ON), the device automatically goes into standby mode if no signal is detected on the selected input for one
hour. When this function is deactivated (OFF), the DM system has to be switched off manually.
the device is supplied with this function activated (ON).
to activate/deactivate this function proceed with the following steps:
With the device switched on, press and hold the "Play Mode" key for more
1
than 3 seconds, until
A U T
Press the "Play Mode" key again briefly, until
2
Press the "Volume +" key to activate the function (ON).
3
Press the "Volume –" key to deactivate the function (OFF).
4
exit the menu by again pressing and holding the "Play Mode" key for more
5
than 3 seconds. if no input has appeared within 10 seconds the device will
automatically exit the configuration menu.
Comment: this function is automatically deactivated if the Aut function is activated.
appears on the display.
appears on the display.
E C O
English
49