Option
Description
Audio Filter
Improves the sound for individual channels in the case of distortion
in mono broadcasts. Sometimes a non-standard broadcast signal
can cause sound distortion or intermittent sound muting when
watching mono programmes.
1 Press M/m to select "Low" or "High", then press OK.
2 Press m to select "Confirm", then press OK.
3 Press m to select "OK", then press OK.
Note
You cannot receive stereo or dual sound when "Low" or "High" is
selected.
Skip
Skips unused channels when you press PROG +/- to select
channels. (You can still select a skipped channel using the number
buttons.)
1 Press M/m to select "Yes", then press OK.
2 Press m to select "Confirm", then press OK.
3 Press m to select "OK", then press OK.
To restore a skipped channel, select "No" in step 1.
Decoder
Views and records the scrambled channel selected when using a
decoder connected to the scart connector
directly or via a VCR.
Note
Depending on the country/region selected for "Country" (page 29), this
option may not be available.
1 Press M/m to select "On", then press OK.
2 Press m to select "Confirm", then press OK.
3 Press m to select "OK", then press OK.
To cancel this function afterwards, select "Off" in step 1.
If you do not experience any sound distortion, we recommend
that you leave this option set to the factory setting "Off".
/
2 either
33
GB