Channel Search
Unicable Setting
By the Unicable LNB the functionality of the Sinbgle Cable Distribution is already inside the LNB.
Currently a maximum of eight receivers are directly connected via a cable to the LNB. Other
distributors are not required.
The options are:
Unicable
No Channel
Frequency
NOTE:
Remove the channel number and the corresponding frequencies of the instructions of the Unicable
LNB and make sure that the correct settings. Otherwise, the receiver is working or not working
properly and it is the message "No signal displayed.
42
Yes = Enables / No = Switched off
Defines the mapping of the recipient
Input of frequency
HRS 8520
Settings