Using Multiple Satellites Via Diseqc 1.2 - Xoro HRS 8520 Bedienungsanleitung

Channel Search
6.

Using multiple satellites via DiSEqC 1.2

DiSEqC 1.2 provides additional control of three plants by DiSEqC commands, via a single coaxial
cable. Of the motor's staff was also a record producer (rod USALS) defined which is to find the
satellite position is particularly simple. With the appropriate receiver is sufficient to enter the
geographical position and the satellites are found automatically - provided that the curved path of the
rotary engine has been correctly set mechanically.
Define "DiSEqC1.2" for Motor. Press ok to configure the rotating parameters.
Following options appear:
•
Move Auto
•
Move Continue
•
Move Step
•
Store Position
•
Goto Position
•
Goto Reference
Move Auto
Press LEFT or RIGHT to rotate the dish west or east. The movement stops automatically.
Move Continue
Press LEFT or RIGHT to rotate the dish west or east. The movement stops automatically.
Move Step
Press LEFT or RIGHT to rotate the dish west or east step by step.
Store Position
Saves the current position of the dish.
Goto Position
Press LEFT or RIGHT to go to a saved position.
Goto Reference
Any other positions.
Now define the satellites as you like and start the search. A new menu appears asking for more
parameters. After setting all parameters press OK for starting the search. The received programs are
shown in the according lists and are saved when the search is finished.
First steps
HRS 8520
23