Using Multiple Satellites Via Diseqc 1 - Xoro HRS 8520 Bedienungsanleitung

Channel Search
2. Direct connection of satellite dish and receiver by using Tone burst
Tone burst is a additional feature of receivers. This
signal does not include digital commands, but it
can nevertheless be evaluated by most of the
switches for position switching.
1. Choose a satellite. Switch to the right side
of the menu (RIGHT) and define "Burst
A".
2. Change back to the left menu (EXIT),
choose a second satellite and apply the
settings with OK
3. Change back to the right menu and define
"Burst B"
Press BLUE to start searching.
A new menu appears asking for more parameters. After setting all parameters press OK for starting
the search. The received programs are shown in the according lists and are saved when the search is
finished.
3.

Using multiple satellites via DiSEqC 1.0

The distribution of analogue and digital signals from the Astra and Eutelsat is using DiSEqC™ (Digital
Satellite Equipment Control) is possible if only one cable to be laid to the satellite receiver. This new
tax system complements the conventional switching criteria, 14/18 Volt or 22 kHz, and removes the
restrictions on maximum 4 switching states. In the simplest version of DiSEqC™ is used between two
universal LNB switch to. The 22 kHz switching circuit is used for the lower and upper frequency band
LNB.
DiSEqC 1.0 controls up to four LNB with the command position A / B and Option A / B. DiSEqC 1.1
controls up to 64 LNB, it will switch in several levels of government. For 16 LNB, take for example
four 4 / 1 DiSEqC 1.0 switch, whose outputs are then placed on the inputs of a 4 / 1 DiSEqC 1.1
switch.
1. Choose a satellite and define in the menu
on the right "LNB1" for DiSEqC1.0.
2. Press EXIT to change to the left side.
3. Now choose a second satellite on the left
menu and
parameter to "LNB2".
4. And so on
You have the possibility to choose up to four satellites. Press BLUE to start searching. A new menu
appears asking for more parameters. After setting all parameters press OK for starting the search.
The received programs are shown in the according lists and are saved when the search is finished.
define the DiSEqC1.0
First steps
HRS 8520
21