To external decoder or amplifier
You have the possibility to transmit the digital audio signal to a decoder or amplifier. Therefore use
the coaxial output.
1.
Switch off and unplug all devices
2.
Connect the receiver and the TV with a SCART or HDMI cable
3.
Connect the HRS 8520 to the decoder or amplifier (coaxial cable)
4.
Switch on all devices
5.
Activate the coaxial input at your decoder or amplifier
Note:
•
The Cables are not part of the accessories
•
There a just a few channels which use digital audio.
•
You can gain information about the audio signal by pressing the AUDIO key on your
remote control
Stereo connection to a amplifier or soundsystem (Stereo)
Connect the chinch cable to the red (R) and white (L) connectors of the HRS 8520 and to the
connectors of the amplifier/sound system which is mostly labelled as "AUX IN" or "Stereo IN". Switch
on the amplifier / sound system and choose the appropriate input mode.
Connection
HRS 8520
15