Dish Setup-Preparation - Xoro HRS 8559 Bedienungsanleitung

Dish Setup-preparation

Preparation:
You will have to be informed of following points to make a successful channel scanning.
Towards which
antenna orient?
If you have more than one antenna or one
antenna with more than one LNB, you will
have to know which type of switch
(Toneburst or DISEqC) is employed and
to which port is each Antenna LNB con-
nected.
For a Unicable/SCR EN50494, you will
have to know which IF-Channel is avail-
able and its corresponding Frequency.
Please ask the installer, if any of the parameter is
not known. If you live in a rental house or apart-
ment, please ask the renter.
Example for Germany:
The most satellite antennas orient satellite ASTRA 19.2
LNB. We recommend the pre installed list in the case.
If you would not like to use the pre programmed list, the common setup for ASTRA 19.2° is as follow-
ing:
Satellite:
LNB Type:
LNB voltage:
22KHz:
Tonebust:
DiSEqC 1.0/1.1:
Motor:
Initial Installation
sagellite does your
019.2E Astra 1H.
09750/10600
13/18V
AUTO
None
None
None
and have a "universal" or "Digital"
°
1 7