Herunterladen Inhalt Inhalt Diese Seite drucken

Anschlussdiagramm - Connection Diagram - Kindermann 7488 000 070 Bedienungsanleitung

Multi-eingang präsentationsumschalter mit hdmi und hdbt ausgang
Inhaltsverzeichnis

Werbung

7. Anschlussdiagramm
1.
Verbinden Sie eine HDMI Quelle (z. B. Laptop, DVD) mit einem HDMI Eingang des MultiScale mittels
HDMI Kabel. Verbinden Sie eine DisplayPort Quelle (z. B. PC/Laptop) mit dem DisplayPort Eingang des
Umschalters mittels DP Kabel. Verbinden Sie eine VGA Quelle (z. B. PC/Laptop) mit dem VGA Eingang
des Umschalters mittels VGA Kabel.
2.
Verbinden Sie für eine Bild/Ton-Ausgabe über HDMI den HDMI Ausgang des MultiScale Umschalters mit
einem Display/Projektor mittels geeignetem HDMI Kabel.
3.
Für eine Signalausgabe über längere Distanzen verbinden Sie einen zum HDBaseT Standard kompatiblen
Receiver (z. B. Kindermann 7488 000066) mittels CAT-6/7 Kabel (bis zu 70 m bei 1080p, bis zu 40 m bei
4K/30Hz Ausgangsauflösung bei AWG 23 Starrleiter-Kabel).
4.
Verbinden Sie zur Audioausgabe über externe Lautsprecher den AUDIO OUT Port des MultiScale
Umschalters mit einem Audioverstärker oder Aktivlautsprechern.
5.
Verbinden Sie eine AV-Mediensteuerung mit dem RS232 Port des MultiScale.
6.
Schließen Sie den DC24V Netzadapter an und schalten Sie das Gerät ein.
1.
Connect HDMI source devices (e. g. Laptop, Blue-ray, DVD) to the HDMI input ports of the MultiScale using
proper HDMI cable. Connect a DisplayPort source device (e. g. PC/Notebook) to the DisplayPort input port
of the switcher with a DP cable. Connect a VGA source device (e. g. PC/Notebook) to the VGA input port
of the switcher with a VGA cable.
2.
Connect an HDMI display device to the switcher's HDMI output port using an HDMI cable for video and
audio output.
3.
For long distance signal transmission connect an HDBaseT compatible receiver (e. g. Kindermann
7488000066) via CAT-6/7 cable (up to 70 m at 1080p, up to 40 m at 4K/30Hz output resolution using
AWG 23 solid wire cable).
4.
Connect active speakers, headphone or an audio amplifier to the AUDIO output port of the MultiScale
switcher.
5.
Connect a control device (e. g. AV controller) to the RS232 port of the switcher.
6.
Connect DC24V power adaptor to the power port and power on.
30
- Connection Diagram

Werbung

Inhaltsverzeichnis
loading

Diese Anleitung auch für:

Multiscale 5x1 4k60 scaler/hdbt out

Inhaltsverzeichnis