Inhaltsverzeichnis
Werbung
6.8.4. RS232 Steuerung Prinzipielle Vorgehensweise
Nummer
Befehl
Item
Command
0
help!
1
s factory reset!
2
r version!
3
xyz!
4
r power!
5
s power on!
6
s power off!
7
r lock!
8
s lock on!
9
s lock off!
10
s beep on!
11
s beep off!
12
r source!
13
s source x!
14
r auto switch!
15
s auto switch mode x!
16
s auto switch off!
17
r output!
18
s output x!
19
r hdcp!
20
s hdcp bypass!
21
s hdcp 1.4!
22
r contrast!
23
s contrast x!
24
r brightness!
25
s brightness x!
- RS232 Communication Command Table
Beschreibung
Description
Display all communication commands
Return to factory reset setting
Read current FW version
Upgrade the switcher FW
Read the switcher power on/off status
Power on the switcher
Power off the switcher
Read the switcher panel lock status
Lock on the panel control
Lock off the panel control
Enable the switcher Beep
Disable the switcher Beep
Read current input source
Switch input source (x = 1:HDMI1, 2:HDMI2, 3:HDMI3, 4:DisplayPort,
5:VGA/YPBPR/C-VIDEO)
Read auto switch function status
Enable auto switch function (x=1: Last connected source mode,
2: First connected source mode, 3: Priority source mode)
Disable auto switch function
Read output resolution
Set output resolution to x =
(1: 3840x2160@30Hz, 2: 3840x2160@25Hz,
3: 1920x1080@60Hz, 4: 1920x1080@50Hz,
5: 1280x720@60Hz, 6: 1280x720@50Hz,
7: 1920x1200@60Hz, 8: 1680x1050@60Hz,
9: 1400x1050@60Hz, 10: 1360x768@60Hz,
11: 1280x800@60Hz, 12: 1024x768@60Hz,
13: Out display EDID native resolution
Read HDMI/HDBT output hdcp enable status
Set HDMI/HDBT output to hdcp pass through mode
Set HDMI/HDBT output to hdcp1.4 version
Read picture contrast status
Set picture contrast to x (x range: 0-100)
Read picture brightness status
Set picture brightness to x (x range: 0-100)
21
Werbung
Inhaltsverzeichnis
