Configuring The Com Port; Setting Up As Multi Cell System - Auerswald COMfortel WS-R2 Inbetriebnahmeanleitung

Commissioning

Configuring the COM Port

Start the ServiceTool.
1.
Click the Communications tab.
2.
1.
3.
5.
In the Comport setting list, select the COM port which was
3.
configured on the PC for the USB/RS-232 adapter (see the
PC's Device Manager).
Under Baud rate, select COMfortel WS-R2/R4 (9600
4.
baud).
Click Set Comport.
5.
The repeater connects to the PC. You now see Re-
peater connected in the status line.

Setting Up as Multi Cell System

Note: To operate the repeater, IP-DECT encryption must be
disabled.
26
2.
4.
COMfortel WS-R2/WS-R4 - Setup Guide V04 11/2015