Important Information; Used Symbols And Signal Words; Safety Information - Auerswald COMfortel WS-R2 Inbetriebnahmeanleitung

Important Information

This section contains necessary information to operate your
equipment safely. Before you put the device into operation, it is
absolutely necessary to read the safety information and make
yourself familiar with the proper use of the device and the techni-
cal data.

Used Symbols and Signal Words

Warning:
Warns of personal injury caused, for example, by hazard-
ous electrical voltage.
Caution:
Warns of material damage.
Important: Indicates possible application errors and conditions
which, for example, could cause function limitations or malfunc-
tions during operation.
Note: Marks complementary hints and notes.

Safety Information

Warning: Improper handling of the device can result in
life-threatening electrical shock, or damage or destroy
the device.
Read the instructions for the device and keep them for future
reference.
Warning: Inappropriate use or incorrect replacement of
the wall wart can result in a life-threatening electric
shock, or can damage or destroy the device.
Only use the wall wart supplied with the equipment.
Make sure it is plugged firmly into the power socket. Loose
plugs or power sockets are a fire risk.
Do not pull at the cable of the wall wart. To disconnect the
power supply, pull out the wall wart at the plug itself.
If the wall wart is damaged, disconnect the fuse for the power
supply before pulling out the wall wart plug.
Ensure you comply with the relevant regulations when han-
dling supply voltage and devices attached to the power sup-
ply.
COMfortel WS-R2/WS-R4 - Setup Guide V04 11/2015
Important Information
17