Connection; A) Connection Of Devices To The Cinch Sockets - Renkforce SR-2000U Bedienungsanleitung

12. Connection

Before connecting the device, ensure that the mains plug is disconnected. Also disconnect all
other devices to be connected from their power supply.
Observe that the audio connections are connected in the correct direction so that the audio will
later be played back in the correct direction as well.
White cinch socket (marked with „L"): Left stereo audio signal
Red cinch socket (marked with „R"): Right stereo audio signal

a) Connection of Devices to the Cinch Sockets

Only connect the device with suitable shielded cinch lines. Use of any other cables may cause
interferences.
To avoid distortions or mal-adjustments that may cause damage to the device, only such devices
must be connected to the cinch sockets that also have cinch connections (only line levels admis-
sible).
CD-Player:
PLAY REC
PHONO DVD CD
TAPE
Receiver
Connect the analogue audio output of your CD player to the input „CD" of the receiver via a suitable cinch
cable.
DVD player:
PLAY REC
PHONO DVD CD
TAPE
Receiver
Connect the analogue audio output of your DVD player to the input „DVD" of the receiver via a suitable
cinch cable.
42
L
R
PLAY REC
EQ
L
R
PLAY REC
EQ
OUTPUT
L
R
CD-Player
OUTPUT
L
R
DVD player