Deleting The User Password; Setting Operating Mode; Setting Bypass Code - Renkforce IP65 Bedienungsanleitung

8.2.1 Deleting the user password

Enter the following key combination in programming mode to delete a user password:
50 XX
XX in this case stands for the user (01 to 99) to be deleted. If all users are to be deleted,
enter "00" instead of a number between 01 and 99.

8.3 Setting operating mode

The code lock can be operated in one of two operating modes "Normal-Mode" or
"Bypass-Mode".
In "Normal-Mode" you enter the user password to activate an attached door opener.
In "Bypass-Mode", once the "Bypass-Code" is entered, the door opener remains ac-
tivated without an alarm being triggered. Enter the following key combination while in
programming mode:
Normal-Mode
52 0
52 1 Bypass-Mode

8.3.1 Setting Bypass Code

Enter the following key combination in programming mode to set the bypass code:
54 BBBB
BBBB in this case stands for the Bypass Code.
30