Triggering Of "Lock Out" Relay Contacts (1); Maintenance And Cleaning; Disposal - Renkforce IP65 Bedienungsanleitung

9. Triggering of "Lock Out" relay contacts (1)

Enter the following key combination when you are not in programming mode to trigger
the "Lock Out" relay contacts.
UU XXXX XXXX
UU in this case stands for the user (01 to 99).
XXXX stands for the corresponding user password.
You can also trigger the "Lock Out" relay contacts (1) by activating the "Egress" sensor.
In addition, the relay contacts can also be activated by the bypass mode. See also
the chapters: "8.3 Setting operating mode, 8.3.1 Setting Bypass Code and 8.3.2 Using
Bypass Mode".

10. Maintenance and cleaning

The product does not require maintenance. A clean soft cloth is sufficient for cleaning
the device. For more stubborn dirt, you can moisten the cloth slightly with lukewarm
water. Do not use aggressive detergents as these can cause discoloration.

11. Disposal

Electric and electronic products do not belong to the household waste.
When the device has become unusable, dispose of it in accordance with the
current statutory regulations.
36