Programming Mode; Setting The Master Code; Setting The User Password - Renkforce IP65 Bedienungsanleitung

8. Programming mode

The master code ex works is "1234".
To enter the programming mode, enter the Master Code twice in succession.
Example: 1234 1234
As soon as the correct code is entered, the colour of the "red/yellow" LED (A) changes
from red to yellow.
You are now in programming mode and can make the settings described in the fol-
lowing.
The programming mode can be exited using the "#" button.

8.1 Setting the Master Code

Enter the following key combination in programming mode to assign a new Master
Code:
00 MMMM
MMMM in this case stands for the 4 digit combination of numbers you wish to assign
as the Master Code.

8.2 Setting the user password

Enter the following key combination in programming mode to assign a new user pass-
word:
Input combination for user 01 to 19:
XX UUUU
Input combination for user 20 to 39:
6 XX UUUU
Input combination for user 41 to 99:
6 XX UUUU
XX in this case stands for the desired user.
UUUU in this case stands for the 4 digit combination of numbers of the desired user
password.
29