ZENEC ZE-200DVD Bedienungsanleitung Seite 11

BEFORE YOU START
14. REMOTE SENSOR
15. RESET
■ Press the reset switch with a sharp tipped tool (needle, ball pen etc). All adjustments
made will be erased and over-written by the factory default.
16. MODE button
■ Press to select the desired source
17. 1 button
■ Press for preset tuning.
18. 2 button
■ Press for preset tuning.
17. 1/DISC-buttons
■ Press for preset tuning and previous disc search when using a CDC player.
18. 2/DISC+buttons
■ Press for preset tuning and next disc search when using a CDC player.
19. 3/P.MODE button
■ Press for preset tuning and switch the play mode (e.g. random, intro (scan)) when using a
CDC player or the built-in DVD player.
20. 4/2-6CH button
■ Press for preset tuning and switch between 2CH and 6CH output mode when using the
built-in DVD player.
21. 5/REPT button
■ Press for preset tuning and repeat playback when using a CDC player or the built-in DVD
player.
22. 6/STOP button
■ Press for preset tuning and stop playback when in DVD mode.
23. PAUSE button
■ Press to pause play.
11