ZENEC ZE-200DVD Bedienungsanleitung Seite 10

BEFORE YOU START
6. AUDIO button
■ When playing a DVD disc, press this button to select the audio language; when playing a
VCD / MP3 disc, press it to select the audio sound channel.
7. SUBTITLE button
■ When playing a DVD disc, press this to select a title language.
8. RESUME button
■ Press the STOP button when playing a disc, later on you can press the RESUME button,
and the player returns to the initial break(stop) point and start playing from this position.
6. AF button
■ When the receiving situation is not good, RDS can automatically send AF of same pro-
gram from RDS broadcasting station. When playing DVD disc, press it to select audio
language; when playing VCD MP3 disc, press to select audio sound channel.
7. TA button
■ Traffic announcement function: When EON broadcasting station has traffic announce-
ment, it can temporarily switch to EON broadcasting station to broadcast. After the
announcement is over, it can switch automatically to original broadcasting station, you
can listen to the original program.
■ During the playing of DVD or CDC, it can insert TA information, after TA broadcasting is
over, it can automatically switch to original DVD or CDC playing model.
■ When playing DVD disc, press to select title language.
8. PTY button
■ Program type: Some stations carry a recognition signal like: news, rock, classic music,
etc.
9. PREVIOUS (
■ Press to go to the previous track (chapter) or start an automatic scan for a lower tuning
frequency when the headunit is in tuner mode.
■ If pressed and hold for over 2 sec, a fast reverse playback will be performed, or the
tuning frequency can be decreased manually when the headunit is in tuner mode.
10. NEXT ( )/FORWARD (
■ Press to go to the next track (chapter) or start an automatic scan for a higher tuning fre-
quency when the headunit is in tuner mode.
■ If pressed and hold over 2 sec, a fast forward playback will be performed, or the tuning
frequency can be decreased manually when the headunit is in tuner mode.
11. ENTER/PLAY button
■ If the current operating mode is DVD, this key is used to start playback of the disc
(ENTER).
12. OPEN.EJECT button
■ Press to open the front panel. If the unit features a loaded disc, it will be ejected.
5643
13. Button
■ Press to move the cursor.
■ Press the button
adjustment mode. While in this mode, press the button
move one angle step.
■ In DVD mode, press the button
setup.
) /REVERSE ( ) button
) button
6
and hold it for more than 2 sec, the unit will enter the panel angle
5
and hold it for more than 2 sec, to enter the menu
10
6
once and the front panel will