Operating Information - EBECO EB-Therm 400 Handbuch

Main menu: Fitter (continued)
Installed
effect
Features
Reset

Operating information

The thermostat display shows the opera-
ting information under the setpoint.
Operating information
Right now
After X: XX
(time in hours
until setpoint
is reached)
Preset to
400 W.
Adjustable.
Adaptive
function
Ventilation
function
Delayed start
Operating
time limita-
tion
Reset all
Save data
Display of the
current temp.
and sensors.
Set
Limited
Ventilation
Required to display energy
consumption.
On/Off (preset On)
Read more on page 20.
On/Off (preset On)
Read more on page 20.
Should heating be started
in 4 weeks time?
OK/No
The underfloor heating is
turned off for x minutes
per hour.
Preset to Off
Adjustable 1–15 min
Saving energy consumption.
Other settings will be reset.
Set point reached.
Maximum or minimum
limitation is activated. The
function is activated under
Sensor selection. Read more
on page 30.
The ventilation function turns
the heat off for 15 minutes if it
detects that the temperature
drops by more than three
degrees in less than one
minute.
31