Getting Started - EBECO EB-Therm 400 Handbuch

Getting started

The EB-Therm 400 has a built-in start-up
guide that takes you through each step
in a simple way. When energizing the
thermostat for the first time, the system
will guide you through the most common
and important settings that are required.
You should wait four weeks after applying
filler before the floor heating is turned on.
This gives the filler time to dry properly.
The thermostat will automatically count
down and turn on the floor heating when
four weeks have passed.
If you have any questions regarding the
usage of EB-Therm 400, please contact us
at Ebeco at any time. Call +031-707 75 50 or
send an e-mail to support@ebeco.se.
25