Dräger UCF 6000 Gebrauchsanweisung Seite 29

The following symbols may appear in the upper area of the display:
If this symbol (overheat
indicator) flashes, the
temperature inside the camera
is reaching its upper limit.
The symbol stays on
permanently once the max.
temperature has been reached.
In this case, the camera
switches off automatically.
This symbol indicates the high
temperature mode. This mode is
automatically activated if a large
part of the displayed thermal
image exceeds 130 °C (266 °F).
The photo memory is 80% full.
The amount of memory used up
is depicted next to the symbol.
Dräger UCF 6000, UCF 7000, UCF 8000, UCF 9000
X X X X
X X X X
X X X
The following symbols may appear in the lower area of the display:
Area in which the temperature is
measured.
The camera is in a non-standard
application mode (TI-BASIC
PLUS).
If this symbol is not displayed,
the camera is in standard
application mode (TI-BASIC).
Battery charge status
The segments indicate the
remaining operating time (see
chapter 3.2.3 on page 37).
The laser pointer is active.
These symbols are displayed
when the zoom function is
enabled.
The camera is connected to a
computer using the USB cable.
The symbol flashes when data
are being prepared for
transmission or are being
transmitted to the computer.
Description
X X X X
X X X
X X X X
X X X X
X X X
X X X X
29