Technical Datas - STG-BEIKIRCH CDi EasyDrive/2 Bedienungsanleitung

Chain motor CDi EasyDrive/2

Technical datas

The power supplies and electrical control equipment are to be operated exclusively with the components authorised by
the manufacturer.
Electrical properties
Operating voltage supply:
Permissible voltage range:
Permissible ripple voltage:
Nominal current:
Cut-off "Open":
Cut-off "Closed":
Power cut-off in each position:
Power consumption at cut-out torque:
Power consumption at cut-off (closed current):
Class of protection:
Mechanical properties
Stroke length:
Pressing force (adjustable):
Tractive force (adjustable):
Clamping force:
Speed of operation (adjustable):
Min. casement height at stroke length:
Dimensions (L x H x T):
Weight:
Circuit connections and operation
Power and connection cable:
Electr. connections:
Connections:
Terminals:
Pause time during change of polarity:
Duty cycle:
Servive life:
Multiple triggering agains End position:
Continuous voltage*:
Maintenance:
26
CDi EasyDrive/2
-15 % / +25 % of nominal voltage
0,65 A at 200 N; 1,0 A at 300 N
integrated electronic power cut-off
integrated electronic power cut-off
Class III in accordance with DIN EN 61140 (VDE 0140-1)
see table on page 25 ( adjustable)
CDi/300 = max. 150 N nominal operating / max. 200 N
1)
CDi/400 = max. 120 N nominal operating
1)
CDi/500 = max. 80 N nominal operating
1)
CDi/600-800 = no transfer of pressure forces
200 N nominal operating / 300 N
1)
see attached assembly drawing
see on page 25
ca. 850 g for CDi/300-300N/DC2 without power cable
not included in delivery
8-pole plug-in screw terminal
see technical documentation
see technical documentation
30 % ED based on 10 min = 3 min ON, 7 min OFF
> 10.000 Cycles
see maintenance
24 V DC
2 V
ss
yes
approx 1,5 A
15 mA
1)
short-time
1)
max. 3000 N
4 - 10 mm/s
≥ 100 ms
suited
suited
short-time
04/13424999486