Scope Of Delivery; Application Example; Mounting - STG-BEIKIRCH CDi EasyDrive/2 Bedienungsanleitung

Scope of delivery

• CDi EasyDrive/2 chain motor consisting of motor
gearbox unit and chain magazine
• Control electronics (pluggable/separate)
• Connector housing with female connector
• Fixing material 4 X M5 screws and rivet nuts
Note: The power- and connection cable is not
part of the delivery! It can be ordered separately as an
accessory mounting. The Easy Drive / 2 Connection cable
is 6-core and available in lengths of 1.5 m; 3.1 m; 5.1 m; 8.1 m

Application Example

The CDi EasyDrive/2 chain motors are intended for
invisible installation into the frame profile of a window.
Installation position and fastening of motors depend on
the window system and its profile.
Therefore fastening accessories, which are matched to
the respective profile, will have to be ordered separately.

Mounting

Instructions for installing the CDi EasyDrive/2 chain drives
Caution: Danger of injury due to suddenly opening
window! Please check that a safety shear is mounted
on the bottom hung window. If not, please install a
safety shear.
Attention: Bottom hung windows differ in the fittings
used. If a tilt fitting is used, then the maximum opening
of the window can be limited by the shear. Please make
sure that the opening width of the chain motor
corresponds to the opening width of the shear, as
otherwise fitting and/or chain motor can be damaged.
04/13424999486
Chain drive CDi EasyDrive/2
Chain magazine
Motor gearbox unit
Control electronics
Connector housing with female connector
CDi EasyDrive/2 profile integrated in turn window inward
19