Connection And Commissioning; Step 1: Connecting The Unit And Switching It On - Auerswald Voicemail Center 461.2 Anleitung

Connection and Commissioning

C C
ONNECTION AND OMMISSIONING
The following sections provide step-by-step instructions for connecting your Voicemail Center
461.2 and configuring it for operation with an Auerswald PBX system. Examples show how
to set up a Private Mailbox and a Global Mailbox.
Private Mailbox
machine for a single subscriber of the PBX system. Voicemail Center 461.2 supports up to
four separate mailboxes for four internal subscribers of the PBX system.
Global Mailbox
for the external numbers you have specified in the PBX system.
If you wish to set up a Global Mailbox but no Private Mailboxes, leave out steps 5-8.
If you wish to set up Private Mailboxes but no Global Mailbox, leave out steps 9-12.

Step 1: Connecting the unit and switching it on

To use your Voicemail Center 461.2, you need
to connect all the necessary cords (see
Pic. 1).
A. Connect the RJ-11 plug (6P/6C) of the AC
adapter to the jack marked POWER on the
bottom of your Voicemail Center 461.2.
B. Connect one of the two RJ-11 plugs (6P/
4C) of the telephone cord to the jack
marked LINE on the bottom of your Voice-
mail Center 461.2.
C. Connect the second RJ-11 plug* (6P/4C)
of the telephone cord to the appropriate
jack on the analog port of your PBX sys-
tem. For details, please refer to the section
"Connection of Analog Devices" in your
PBX system user manual.
D. Connect the AC adapter to a freely acces-
sible 230 V mains power socket.
* In Germany, you will also need an RJ-11 to TAE adapter.
42
... : The term Private Mailbox refers to a separate answering
o1 o6
... : The term Global Mailbox always refers to the answering machine
PBX
Pic. 1