Playing The Current Tune Repeatedly; Other Convenient Tape Functions; Skipping The Blank Portions On The Tape - JVC KS-FX722R Bedienungsanleitung

Other convenient tape functions

Skipping the blank portions on the tape

You can skip blank portions between the tunes
(Blank Skip).
When this function is on, the unit skips blank
portions of 15 seconds or more, fast-forwards to
the next tune, then starts playing it.
• See also "Changing the general settings (PSM)"
on page 19.
1
Press and hold SEL (select) for more
than 2 seconds so that one of the
PSM items appears on the display.
(PSM: see page 20.)
2
Press ¢
"B. SKIP" (blank skip).
3
Turn the control dial clockwise to
select "ON."
4
Press SEL (select) to finish the
setting.
To cancel Blank Skip, repeat the same procedure
and select "OFF" in step 3 by turning the control
dial counterclockwise.
16
or 4
to select
Now Blank Skip is activated.

Playing the current tune repeatedly

You can play the current tune repeatedly (Repeat
Play).
Press RPT while playing a tune you
want to hear over again.
Each time you press the button,
Repeat Play turns on and off
alternately.
Lights up when Repeat Play is turned on.
When the tune has been played, the tape is
automatically rewound to the beginning of that
tune and the same tune will be played again.
To cancel Repeat Play, press RPT again so that
the RPT indicator goes off.
Note:
In the following cases, Blank Skip and Repeat Play
may not operate correctly:
– Tapes with tunes having long pianissimo passages
(very quiet parts) or non-recorded portions during
tunes.
– Tapes with short non-recorded sections.
– Tapes with high level noise or humming between
tunes.
– Tapes with tunes recorded at low recording levels.