Pioneer FS-W40 Bedienungsanleitung Seite 58

> Before Start > Part Names
Wireless Satellite Speaker
Type
2 Way Closed Box
Rated Output Power (IEC)
2 ch 40 W at 4 ohms, 1 kHz, 1 ch driven of 10% THD
Maximum Effective Output Power (JEITA) (Australian models)
2 ch 40 W at 4 ohms, 1 kHz, 1 ch driven of 10% THD
Frequency response
(2.1 ch): 85 Hz - 20 kHz
(2 ch): 65 Hz - 20 kHz
Dimensions (W H D)
125.5 mm 220 mm 145.5 mm
4-15/16" 8-11/16" 5-3/4"
Weight
1.7 kg (3.7 lbs.)
Drivers unit
9 cm (3-1/2") Cone Woofer 1
2 cm (3/4") Dome Tweeter 1
Power Supply
AC 100 - 240 V, 50/60 Hz
Power Consumption
21 W
2.1 W (Wireless Speaker Standby ON)
0.4 W (Wireless Speaker Standby OFF)
Other
Non-magnetic shielding
For non-magnetic shielded speakers:
Try moving the speakers away from your TV or monitor. If
discoloration should occur, turn off your TV or monitor, wait
15 to 30 minutes, and then turn it back on again. This
normally activates the degaussing function, which
neutralizes the magnetic field, thereby removing any
discoloration effects.
> Install > Setup > Playback
Supplementary information | Firmware Update | Others
E
N
57