Shot Of Steam - Philips GC4820 Bedienungsanleitung

2 Press the spray button several times to moisten the article to be
ironed.

shot of steam

A powerful shot of steam helps remove stubborn creases.
1 Make sure that there is water in the water tank.
2 Press and hold the shot-of-steam button for a few seconds. Then
release the button.
Note: The shot-of-steam function can only be used at temperature settings
between 3 and MAX.
vertical shot of steam
- You can also use the shot-of-steam function when you hold the iron
in vertical position. This is useful for removing creases from hanging
clothes, curtains etc.
Never direct the steam at people.
turbo steam
The turbo-steam function helps remove difficult creases.
1 Make sure that there is water in the water tank.
2 Press and hold the turbo-steam button for a few seconds. Then
release the button.
Note: The turbo-steam function can only be used at the MAX temperature
setting.
Note: Do not keep the button pressed for more than 10 seconds. Wait at
least one minute before you use the turbo-steam function again to let the iron
reheat. The iron is hot enough when the temperature light goes out.
Drip stop
This iron is equipped with a drip-stop function to prevent water from
dripping out of the soleplate: the iron automatically stops producing steam
when the temperature is too low. When this happens, you may hear a
sound.
EnGlish
13