Teac CD Copy Station CD-RT-Standalone/5 Handbuch Seite 49

Pressing the ENTER key will start playing the track before the
current track. If the first track is currently being played, and the
ENTER key is pressed, the last track will start playing.
5. Pressing the MODE key from the display shown above will change
the display again:
6. Press the ENTER key from this screen to exit the audio play mode
and return to the main mode selection screen. An appropriate error
message is displayed if there is no disc in the drive (No disc
if the disc is unreadable for any reason (it is not a finalized disc, or
is wrongly inserted into the drive, does not contain audio data, etc.
(Bad disc
Bad disc Bad disc Bad disc)). Bad disc
NOTE
If the copied CD contains audio errors, you will be able to hear
them, but no message will appear on the display. If a copied
CD contains audible errors, you may want to consider
rerecording at a lower speed, which will almost certainly reduce
the error rate.
3. Modes
Cd-rteng.p65
Track 05 Play Track 05 Play
Track 05 Play Track 05 Play Track 05 Play
3 Exit 3 Exit 3 Exit 3 Exit 3 Exit
49
No disc), or
No disc No disc
No disc
49
10.06.99, 16:41