Error Conditions - Teac CD Copy Station CD-RT-Standalone/5 Handbuch

If there has been an error on the copying (i.e. the two CD-ROMs
do not match) or if they do not match in any other way (the wrong
pair of discs has been loaded), the compare operation will stop at
the point at which the mismatch was detected, and the display will
show:

3.4.1 Error conditions

If no disc has been placed in either the MASTER or the SLAVE drives,
the display will show a No disc
which the disc is missing.
If the master or slave disc is damaged, scratched, or is otherwise
unreadable, the display shows Disc Err
as appropriate. If the discs are different, the display shows a No match
message.
The compare operation can be stopped at any time by pressing and
holding down the MODE key and pressing the ENTER key. An error
message will be displayed and you should use the MODE key to return
to the mode selection.
3. Modes
Cd-rteng.p65
Compare finished Compare finished Compare finished
Compare finished Compare finished
No match No match No match
No match No match
No disc error message with the drive from
No disc No disc
No disc
Disc Err, with either Master
Disc Err Disc Err
Disc Err
47
Master or Slave
Master Master Slave Slave
Master Slave Slave
No match No match No match No match
47
10.06.99, 16:41