After-Sales Service And Application Service - Bosch PFS 3000-2 Originalbetriebsanleitung

Problem
No spray material emerges from
the nozzle

After-sales Service and Application Service

In all correspondence and spare parts orders, please always
include the 10-digit article number given on the type plate of
the fine-spray system.
Our after-sales service responds to your questions concern-
ing maintenance and repair of your product as well as spare
parts. Exploded views and information on spare parts can al-
so be found under:
www.bosch-pt.com
Bosch's application service team will gladly answer questions
concerning our products and their accessories.
Great Britain
Robert Bosch Ltd. (B.S.C.)
P.O. Box 98
Broadwater Park
North Orbital Road
Denham
Uxbridge
UB 9 5HJ
At www.bosch-pt.co.uk you can order spare parts or arrange
the collection of a product in need of servicing or repair.
Tel. Service: (0844) 7360109
E-Mail: boschservicecentre@bosch.com
Ireland
Origo Ltd.
Unit 23 Magna Drive
Magna Business Park
City West
Dublin 24
Tel. Service: (01) 4666700
Fax: (01) 4666888
Bosch Power Tools
Cause
Sliding switch 24 is in position 
No pressure build-up in container 7
Suction tube 15 loose
Nozzle needle 13 clogged
Suction tube 15 clogged
Ventilation hole 16 on suction tube 15
clogged
Container seal 14 missing or damaged
Spray material too viscous
Spray material dirty (lumps of paint)
Corrective Measure
Set the sliding switch 24 to "wood" or "wall"
application
Turn the container 7 towards the close
symbol until you hear the lock ring 6 en-
gage
Insert suction tube properly
Clean nozzle needle
Clean suction tube
Clean the suction tube and the ventilation
hole
Slide a (new) container seal over the suction
tube into the groove
Dilute the spray material again and carry out
a test-spray run
Completely empty and clean the spray gun;
pour the spray material through the filling
sieve when filling
Australia, New Zealand and Pacific Islands
Robert Bosch Australia Pty. Ltd.
Power Tools
Locked Bag 66
Clayton South VIC 3169
Customer Contact Center
Inside Australia:
Phone: (01300) 307044
Fax: (01300) 307045
Inside New Zealand:
Phone: (0800) 543353
Fax: (0800) 428570
Outside AU and NZ:
Phone: +61 3 95415555
www.bosch.com.au
Republic of South Africa
Customer service
Hotline: (011) 6519600
Gauteng – BSC Service Centre
35 Roper Street, New Centre
Johannesburg
Tel.: (011) 4939375
Fax: (011) 4930126
E-Mail: bsctools@icon.co.za
KZN – BSC Service Centre
Unit E, Almar Centre
143 Crompton Street
Pinetown
Tel.: (031) 7012120
Fax: (031) 7012446
E-Mail: bsc.dur@za.bosch.com
English | 25
2 609 007 771 | (28.2.14)