Inhaltsverzeichnis
Werbung
6. System Setting
6.1 System
Menu->Settings->System settings
Tip: You can set all the settings here by
pressing VOL◄/ VOL► button.
1. Menu Language: Set the menu language.
2. Audio1: Set the preferred audio language.
3. Audio2: Set the sub-prime audio language.
4. Subtitle Language: Set the subtitle
language.
5. EPG Language: Set the EPG language.
6. TXT Language: Set the TXT language.
7. LCN: Set the LCN On or Off.
8. Auto Exit CH List: If you set ON, the channel list will disappear when you press OK on
a Highlighted channel.
9. Recall List: You can turn Recall List on or off. If you set ON, when you press Recall
button of RCU you can get the recall list. If you set OFF, when you press recall button you
can go back to the last program you have selected.
10. ECO Stand By: If set to "on", power consumption in Standby is reduced, but Loop-Out
is disabled and start-up of the Set Top Box takes more time.
11. Front Panel Light: Set the brightness of
the LED-Display.
6.2 OSD
Menu->System settings->OSD Setup
1. Digital Audio: Selects the Output-Format
for the Digital Audio Output
ENG 10/14
Werbung
Inhaltsverzeichnis
