Viessmann CM737 Benutzerhandbuch Seite 8

ENG
'Getting Started'
This section shows you how to setup and run the CM737 in 2 simple steps:
STEP 1: Setting the Time
To set the Time:
a. Press either of the
the time digits (when the unit is powered for the first time the display shows 12:00).
b. Use the
or buttons to set the correct time then press the green
Each press of the buttons will change the time by one minute and holding them down will change
the time slowly at first and get progressively quicker.
Note: If this mode is entered accidentally then press the AUTO, MAN or OFF buttons to exit.
STEP 2: Running the Built-in Heating Program
The CM737 is now ready for operation. Press the AUTO button and the built-in heating program will
start running. Note: The built-in heating program has been designed to provide normal comfort
requirements, but if you want to customise the settings please see the next section 'Programming
the CM737'.
'Efficient Daily Use'
The Built-in Heating Program
The built-in heating program has 4 temperature level changes per day that can be set between
3.00am and 2.50am the following day - allowing you to maintain the evening temperature after
midnight. Each temperature level can be set between 5°C and 35°C, and adjusted in 0.5°C
increments. The factory default program for heating is as follows.
Monday to Friday (Day 1 to 5)
Period
Time
Temperature
Saturday & Sunday (Day 6 & 7)
Period
Time
Temperature
8
or buttons once to enter time setting mode. The LCD screen flashes
1
6:30
21°C 18°C
1
8:00 10:00
21°C 21°C
SETTING-UP THE CM737
PROGRAMMING THE CM737
2 3
8:00 18:00
21°C
2 3
18:00
21°C
button to confirm.
4
22:30
16°C
4
23:00
16°C