Explanation Of Installation; Misa 160 - Holzmann MISA160 Originalbetriebsanleitung

11.6

Explanation of installation

11.7

MISA 160

6.1 MIG/MAG welding
put the switch MIG/MMA（TIG） SWITCH into
Check the products according to the packing list when open the package.
Grounded protection.Attached the diagram 6
The power source is 230Vac/(50~60Hz) .The yellow/green double cable is grounding
cable.Be sure to connect the yellow/green double cable into the grounding connection in
the welding locale .Another way is selecting the M8 bolt on the back on the machine and
connect the grounding as the diagram as following.
Install the welding gun on the front panel and screw the welding gun ,then lock the bolt.
Connect the gas pipe with the gas bottle according to the locale conditions. Check the air
proof conditions to ensure the good airproof.
HOLZMANN Maschinen Austria www.holzmann-maschinen.at
MIG/MAG Inverter Schweißanlage / MIG/MAG inverter welding unit MISA160
"MIG"
ASSEMBLY
Seite 32