General Rules Of Security; Product Specific Rules Of Security - Holzmann MISA160 Originalbetriebsanleitung

Use proper safety clothing and devices when operating the machine (, safety
goggles, ear protectors, safety shoes ...)! Do not wear safety gloves for oper-
ating because they decrease the working accuracy and they might be pulled
into the saw blade.
Before any maintenance you have to disconnect the panel saw from the
power source. Never use the plugged cable for transporting or manipulating
the machine.

10.4 General rules of security

Keep the workshop clean: It's easy to cause accidents if the workshop is in mess.
Don't allow strangers and children to be close to the workshops:
Keep tools carefully: Unused tools should be kept in dry and high places where children's
hands couldn't reach to, please lock them if it's necessary.
Be careful to choose tools: Don't use small tools or accessories to finish burdensome jobs.
Maintain tools very carefully: Keep cleaning in order to make them perform fully.
Keep vigilance: Keep your brain sober when working. Don't operate dynamoelectric tools
when feeling tired.
Check broken parts and accessories: Operators should carefully check whether every part,
every accessory or every protecting equipment has been broken before intermittently us-
ing tools in order to decide whether such objects perform again.
Advise: It's easy to cause broken tools, even personal hurt if you don't use accessories
from original Company.

10.5 Product specific rules of security

Follow these precautions carefully. Improper use of any welder can result in injury or
death.
ONLY CONNECT WELDER TO A POWER SOURCE FOR WHICH IT WAS DESIGEND. The
specification plate on the welder lists this information. When welding outdoors only use an
extension cord intended for such use.
ONLY OPERATE WELDER IN DRY LOCATIONS and on cement or masonry floor. Keep area
clean and uncluttered.
KEEP ALL COMBUSTIBLES AWAY FROM WORK SITE.
DO NOT WEAR CLOTHING THAT HAS BEEN CONTAMINATED with grease or oil.
KEEP CABLES DRY AND FREE FROM OIL AND GREASE and never coil around shoulders.
SECURE WORK WITH CLAMPS or other means; don't overreach when working.
NEVER STRIKE AN ARC ON A COMPRESSED GAS CYLINDER
DON'T ALLOW THE INSULATED PORTION OF THE ELECTRODE HOLDER TO TOUCH THE
WELDING GROUND WHILE CURRENT IS FLOWING.
SHUT OFF POWER AND UNPLUG MACHINE WHEN REPAIRING OR ADJUSTING. Inspect be-
fore every use. Only use identical replacement parl.
FOLLOW ALL MANUFACTURER'S RULES on operating switches and making adjustments.
ALWAYS WEAR PROTECTIVE CLOTHING when welding . This includes: long sleeved
shirt(leather sleeves), protective apron without pockets, long protective pants and boots.
When handing hot materials, wear asbestos gloves.
ALWAYS WEAR A WELDER'S HELMET WITH PROTECTIVE EYE PIECE when welding. Arcs
may cause blindness. Wear a protective cap underneath the helmet.
WHEN WELDING OVERHEAD, BEWARE OF HOT METAL DROPPINGS. Always protect the
head, hand, feet and body.
. KEEP A FIRE EXTINGUISHER CLOSE BY AT ALL TIMES.
HOLZMANN Maschinen Austria www.holzmann-maschinen.at
MIG/MAG Inverter Schweißanlage / MIG/MAG inverter welding unit MISA160
SAFETY GUIDELINES
Seite 27