11.1
Indicating and warning
11.1.1 Control panel MISA160
C
11.2
Voltage indicating
The voltage meter on the front panel can indicate the actual welding voltage or preset voltage.The
indicating number has the precision of 0.1V .The meter indicates the preset during no welding.
11.3
Current indicating
The current indicating meter on the front panel indicates the actual welding current during the weld-
ing.The adjusting range is
MISA160: -70±10~-330±20.The max preset scale can be -135~-300 in special requirements
11.4
Power indicating
If the indicating light is on the control circuit connects the power already.
4.1.4Switch for gas inspection
Before welding, if switch is "ON",you can adjust the gas flow.
During welding,switch is "OFF",otherwise the flow directly .
Warning
HOLZMANN Maschinen Austria
www.holzmann-maschinen.at
MIG/MAG Inverter Schweißanlage / MIG/MAG inverter welding unit MISA160
ASSEMBLY
Seite 30