Excess Temp; Safe And Installation Caution - Holzmann MISA160 Originalbetriebsanleitung

In order to remind the operator.we design the warnings as following .

11.4.1 Excess temp

In the condition of more than 40
(I2>135A), on MISA303 (I2>160A),efficiency radiator temperature id more than 80±5
begins working.The indicating light is on ,the power stop the welding automatically.The fan running contin-
uously.If the temperature is lower,the indicating is off,the power can work and weld can be continued au-
tomatically ,Remind:Don't turn off the machine while the indicating overheat light is ON.
Warning
If the circuit is over current ,the light is ON.The control circuit stop the power automatically.
11.5

Safe and installation caution

Read the safe caution before installation and operation .It come down to the high voltage electrici-
ty,electric Arc and high temperature splash.So keep the safe regulation ,operate the machine proper-
ly,avoid the danger of electricity and high temperature arc.
Check if any damage ot out looking ot the welder.
Confirm the capacity (MISA160):more than 30A
Power source is grounded,diagram 6
Prohibit the combustible goods in the welding locale.
There is fire proof measure in the welding locale with favorable ventilated condition.
There is smoke discharge system if the welding is operated inside the house in order to
keep the safety of workers.
The welding operator must be professional workers.
The operator
shoes,gloves,cover,welding make and welding dress etc.
HOLZMANN Maschinen Austria
temperature,large current is used continuously on MISA 160
must be fitted
www.holzmann-maschinen.at
MIG/MAG Inverter Schweißanlage / MIG/MAG inverter welding unit MISA160
with safe accessories
ASSEMBLY
,overheat circuit
.Such as safe
Seite 31