Standard Settings - Topcom nelson Bedienungsanleitung

Nelson
Redial
The last dialled number is automatically stored in the temporary memory.
1. Press the line button .
(15)
2. Press the redial button to automatically redial the last number.
(16)
3. The unit will dial the number automatically.
4. Wait until someone answers your call.
FUNCTIONS
The function button can only be used while the telephone is in standby
(13)
mode.
When during 10 seconds no button is pressed, the unit will automatically switch
to the standby mode.
When a call comes in after the function button
automatically switches to the standby mode and the handset will start ringing.

Standard Settings

The unit is preset to:
F1 : high ringer volume
F2 : normal ringer melody
F# : no external line access number
Function 1: Ringer Loud/Silent
1. Press the function button
(13)
2. Press 1.
3. You can hear the present ringer volume.
4. Press 1 a number of times to select one of the volume settings.
5. Press the memory button to store the selected ringer volume, a con-
(12)
firmation beep will be heard.
38
is pressed, the telephone
(13)
Nelson
Function 2: Ringer Melody
Four different ringer melodies can be selected.
1. Press the function button .
(13)
2. Now press 2.
3. You can hear which melody is currently selected.
4. Press 2 a number of times to select one of the ringer melodies.
5. Press the memory button to store the selected ringer melody, a con-
(12)
firmation beep will be heard.
Function #: External Line Access Number
If you have a PABX telephone exchange, a certain number must be dialled to get
access to an external line. This function allows you to select and set this number
yourself (0 - 9). Later, when the redial button
recognises the number preceding the actual telephone number as the external
line access number and will automatically insert a pause after this number.
1. Press the function button .
(13)
2. Press the # button .
(20)
3. Press a button (0 - 9) to select the access number.
4. Press the memory button to store the access number.
(12)
Note:
Press the function button and the # button to cancel the access number.
(13)
Then press the memory button .
(12)
39
is pressed, the phone
( 1 6 )