Tenovis cs 578 Bedienungsanleitung Seite 50

Operation on the DEC-module of the Integral 1
(continued from previous page)
You hear an acknowledge tone. The
mobile unit is now logged onto the
DEC module of the Integral1.
if nec. Press the "Home" key if necessary.
You then return to the initial state.
On the system terminal: Press the
2x "Disconnect"-key twice. You then
return to the initial state.
Logging off from the DEC module
Inputs on the system terminal:
Switch to the programming mode with
"Star48".
Enter "30".
Input the call number of the mobile
e.g.
unit, e.g. "35".
Scroll down
Scroll down
Confirm with "Enter"
Press the"Disconnect" key.
Press the"Disconnect" key.
You then return to the initial state.
Inputs on the CS578 mobile unit:
Scroll down from the initial state to the
menu item "17". You are shown that
your mobile unit is still logged onto
"BASE1" (= here DEC-module).
Press the "Clear" key.
C
Your mobile unit is now logged off
completely from the DEC module.
50
continued
17 bASE 1 int 0
individual
destinations
Prog.30 T
Progr. 30 T35
logged on
Accept:
Clear
Prog.30 T_
individual
destinations
17 bASE 1 int 0
17 _