Tenovis cs 578 Bedienungsanleitung Seite 49

Operation on the DEC-module of the Integral 1
Log on to the DEC module
On the system terminal: Switch to
the programming mode with "Star48".
Enter"30".
Enter the call number e.g. "35". (Only
e.g.
use one of the pre-programmed call
numbers between 31 and 39). The
digits displayed after the "A" have no
significance.
Press the "Star"-key. You will see a
14-digit park number in the display e.g.
30000012345678
On the mobile unit: Scroll down from
the initial state to menu item "17".
Enter the 14-digit park number (read
0
from the system terminal) and then
. . .
press the "Hash" key.
On the system terminal: Press the
"Hash"-key. You will see an 8-digit
number behind the "A" on the display
e.g.
For security reasons, you only have about 1 minute to make the
following inputs on the mobile unit. If the input is not complete by then
you have to log in again from the start.
On the mobile unit: Scroll down.
The mobile unit now tries to find radio
contact with the DEC- module and
jumps automatically to the next display.
Do not enter your base or mobile
unit PIN here!
Enter the 8-digit number which is
0 9
. . .
displayed on the system terminal after
the "A" e.g.
Scroll down once.
Your mobile unit briefly shows the
display opposite and then jumps auto-
matically to the next display.
(continued on next page)
.
.
12345678
.
12345678
continued
individual
destinations
Prog.30 T
Prog.30 T35
A:09090911
Prog.30 30000012345678
17 _
17 30000012345678#
Prog.30 T35 A:12345678
17A Search
17B PIN ----
17B PIN 12345678
17c Subscribing
49