Tenovis cs 578 Bedienungsanleitung Seite 46

Logon and logoff procedures
Logging off
mobile units
Notes:
Selecting the
base station
Notes:
46
Scroll to menu
Enter base PIN if necessary (delivery state:
item 25 "Logoff"
0000) and scroll down once. The internal
numbers of the currently logged on mobile
units are displayed.
1 6
. . .
Enter the internal numbers of the
mobile units to be logged off (they
then flash in the display)
S A wrong number can be cancelled by typing the internal
number again.
S Logged off mobile units can no longer telephone via the base
station.
S The radio symbol is still displayed in the logged off mobile unit.
It goes out when the mobile unit has also been logged off under
menu item 17 or 18 (→ p. 45, Notes).
Enter base PIN if necessary (delivery
Scroll to menu
state: 0000) and scroll down once. The
item 19 "Change
internal numbers of the base stations to
base station"
which the mobile units are presently
logged on are displayed.
2
0
. . .
Select the base station:
0: automatic selection;
1: base 1; 2: base 2.
S If "automatic selection" is set, the base station found first is
used. The word "Auto" appears additionally for "automatic
selection".
S The digit of the desired base station flashes for a max.
10 seconds until contact is established. If no contact can be
established, the digit disappears and a stroke appears.
0 9
. . .
Log off the mobile unit
and return to the initial
state
9
0
. . .
Save the setting
continued