Multi-Base Setting - Engenius EP802 Handbuch

2. Press
OPTION right soft key, you can
to choose save, delete, clear all.
a. Save call log:
(1) Press
SELECT right soft key, you can use
or key to scrool the name, and press
DELETE to edit the name.
Then press SAVE left soft key to save the name.
(2) Use
or key to scrool the number, and
press DELETE to edit the number.
Then press SAVE left soft key to save the
number.
(3) After above process, the call log saved into
phonebook.
b. Delete call log:
(1) Press SELECT right soft key followed by
left soft key to confirm deleting.
c. Clear All:
(1) Press SELECT right soft key followed by
left soft key to confirm clearing all caller ID
records.
Call a Caller ID
1. Press
key, use or
2. When display a caller ID, Press
or key
YES
YES
key to scrool the call log.
or to dial this number.
~47~

Multi-Base Setting

"Multi-Base" setting allows expanding coverage or lining capacity. When
nd rd th
adding 2 , 3 or 4 base station, using one of the handsets which registered
st
to the 1 base station (i.e. the handset with ID 11), followed by below
processes：
1. Press MENU right soft key followed by "7" to enter the
registration mode.
2. Press & hold the base station PAGE button for thress
seconds, the base station will emit the prompt sound
(also the base In Use LED is flashing).
3. Press digit "3" of handset to enter the Multi-Base
setting.
4. Select BS # 1
5. Repeat above step 1 ~ 4 to continuously add the 2
rd th
3 or 4 base station.
st
Re：The base ID for 1 base station is "10", for 2
rd
base station is "20", for 3 base station is "30", for
th
4 base station is "40".
Notes:
1. When initial setting the "Multi-Base", you have to select the BS #1
first, then followed the above steps to select 2
2. For synchronization mechanism, all handsets must be register again
before start using multi-base scenario. i.e. the initial handset ID with
1x must register to BS1, and the rest handsets must be registered to
nd rd th
2 , 3 or 4 base station respectively.
3. After all above processes, the "Multi-Base" is complete then.
nd
,
nd
nd rd th
, 3 or 4 base.
~48~