Room Monitoring; Remotely Activate The Answering Machine; Out Of Memory - Geemarc CL210A Handbuch

ANSWERING MACHINE

Room Monitoring

This remote access feature enables you to call your home and turn ON the
answering machine's microphone function. This means you can monitor
sounds in the room where the answering machine is situated for up to 30
seconds.
Remotely Activate Answering Machine
If you forget to switch on your answering machine on going out, you can
switch it on remotely via another telephone.
Dial your telephone number from the remote telephone and let it ring.
After approximately 10 rings, the machine will answer and emit a long
tone
Enter the remote code, printed on the base of the unit. If the code is
accepted, you will hear two short beeps
Press 9#. You will hear two beeps. This confirms that the
answering machine is now on.
Hang up your telephone

Out of Memory

The total capacity of the answering machine's memory is approximately
14 minutes. The memory space is shared between the outgoing message,
personal memos, and regular incoming messages. When the memory is
full the display will show FL. The answering machine will answer after
10 rings to allow remote playback and deletion of messages, no new
messages will be accepted until the existing messages have been played
and erased.
22