Using The Telephone; Making A Call; Making A Call - Hands Free - Geemarc CL210A Handbuch

USING THE TELEPHONE

Making a Call

Pick up the handset.
When you hear the dialling tone, dial the number on the keypad.
To end the call simply replace the handset in the cradle
Making a Call – Hands Free
Press . The hands free function will be activated,
Dial the required telephone number. To adjust the volume, use the
volume control VOL located on the right side of the telephone
When the third party answers the call, you may speak with the
telephone in the hands free mode ( handset in the cradle). Speak
towards the microphone located on the front edge of the telephone.
To end the call, press .
Note
: To deactivate the Hands Free function during a call, lift the
handset. To activate the Hands Free function during the call, press
and replace the handset on the cradle at the same time.
Also, when in hands free mode, only one person may talk at a time. The
switch-over between speaker and microphone is automatic. This is
dependent on the sound level of the incoming call and the microphone
respectively. It is therefore essential that there are no loud noises, e.g.
music, in the immediate vicinity of the telephone, as this will disrupt the
hands free function.
11