Listening To Messages - Geemarc CL210A Handbuch

ANSWERING MACHINE

Listening to Messages

The display flashes to show how many new messages have been
received. If no new messages have been received the display shows total
messages (old).
Playback will always begin with any new messages. For example if there
are three old messages and two new ones, only the two new ones will be
played back, then the answering machine will return to standby mode.
Press the play button once again to listen to all messages, starting with
the oldest messages.
Press to start playback.
If you want to pause during playback of a message press
message will pause (max. 7 seconds).
Press again to resume playback.
When playback is finished you will hear two short beeps and the machine
will return to standby mode. All incoming messages are saved (unless you
have erased any during playback, see below), new messages will then be
recorded after the old ones.
Other Functions available during Playback
Skip to next message
Repeats the current message, or hold down until you hear
a beep to step back through the messages
Stop playback
Erase messages
Playback through handset receiver (+40dB volume)
To playback your messages through the handset, pick-up the handset and
press . You can now you can press
volume to 40dB.
to boost the message
18
and the